GPS Module NL-660ERS
€ 17,50 incl. VAT
Navilock NL-660ERS / 61980 with cable Navilock 95843
Description
Navilock U-Blox 6 GPS/GNNS Module RS232 5V, for direct connection to, for example, the Raspberry pi or Arduino.
The Module is set by default to:
GNSS: GPS
Baud rate: 38400
Refresh rate: 4Hz / 250ms
Sentences: GGA, GLL, GSA, GSV, RMC, VTG
However, we can configure the module entirely according to your wishes.
Supplied with adapter cable 5 pin, 5cm, article Navilock 95843
Full specifications of the module can be found at Navilock: http://www.navilock.de/produkte/F_831_GLONASS_61980/merkmale.html
Example connection directly to the pins of the Raspberry pi:
(Be careful: Raspberry uses different numbers for the name of the GPIO, so we use the pin# numbering of the 40 pins, pin# 01 is the 3,3v DC Power)
Wire color black is 1: +5Volt on pin# 02 or 04
Wire 2: Ground for example pin#06
Wire 3: Shield=GND for example pin#09
Wire 4: RS232 TXD on pin#10 RXD0
Wire 5: RS232 RXD on pin#08 TXD0
Reviews
There are no reviews yet.