NMEA IN Module
€ 9,50 incl. VAT
Description
With this extra NMEA input you can connect an extra NMEA 0183 instrument, such as GPS, Anemometer, Compass, etc. Ask us what you need for your configuration and the many possibilities!
The NMEA IN module is already installed as standard in the BoatController, if you want an extra NMEA0183 input then you must BC Multiplexer to purchase.
The NMEA IN Module is a fully galvanically isolated optocoupler with a 2 wire differential NMEA0183 input at RS422 level compatible with RS232.
Specifications
The NMEA IN Module is a fully galvanically isolated optocoupler with a 2 wire differential NMEA0183 input at RS422 level compatible with RS232.
Specifications Optocoupler:
- Wide supply voltage: 2.7V to 24V VCC Operation
- Low Drive Current: 3mA • Open Collector Output
- TTL compatible
- 15 kV/μs High Common-Mode Rejection at VCM = 1500 V
- Guaranteed performance from Temperature Range: -40°C to +105°C
- Low Propagation Delay: 1μs max at 5V
- Worldwide Safety Approval (Pending): – UL1577 recognized, 3750Vrms/1min – CSA Approval – IEC/EN/DIN EN 60747-5-5 Approval
Support
The NMEA IN Module is very easy to install with one action.
Can also be used separately with a Raspberry pi, ask us about the possibilities.
Only logged in customers who bought this product can write a review.
Reviews
There are no reviews yet.