Pcnautic Pro Tiller Pilot
€ 1.045,00 incl. VAT
In stock!
Midstroke
The midstroke is the distance between the Tillerpin and Brass bushing with the rudder in the middle.
With the Easy Drive without rudder feedback a minimum midstroke of 570mm is possible, with rudder feedback a minimum of 600mm, maximum 900mm
The push rod extensions from Raymarine and Simrad do not fit the Pcnautic drive
The Raymarine Q047 drive (ST4000/SPX5/S1/EV-100) has a standard midstroke of 620mm without extension
The Simrad TP10, TP22 and TP32 have a standard midstroke of 595mm without extension
The Raymarine ST1000 and ST2000 have a standard midstroke of 589mm without extension
Connector drive
You can choose between a straight connector or an angled connector on the drive.
The Offshore and Pro Tiller Pilot is supplied with pre-assembled 5-pin solder plugs.
The Easy Tiller Pilot only comes with the straight 2-pole screw connectors supplied separately.
The Raymarine Tiller Drive Replacement set comes pre-assembled with 5-pin solder connectors.
Drive cable length
The cable length at the drive together with the cable length from the socket to the MotorController or mounting box cannot exceed 1,95 meters in total.
Connector socket
You can choose between a straight connector or an angled version.
The angled version is suitable for a maximum skin thickness of 10 mm
The Offshore and Pro Tiller Pilot is supplied with pre-assembled 5-pin solder plugs.
The Easy Tiller Pilot only comes with the straight 2-pole screw connectors supplied separately.
The Raymarine Tiller Drive Replacement set comes pre-assembled with 5-pin solder connectors.
Length socket cable
The cable length at the drive together with the cable length from the socket to the MotorController or mounting box cannot exceed 1,95 meters in total.
Control head cable length
Info length control head cable
Power cord length
Power cable length info
Description
Maximum operational reliability under severe conditions
The Pcnautic Pro Tiller Pilot has been developed for sailors who need to be able to rely fully on their autopilot, even in heavy and demanding conditions. The system combines an internal rudder position sensor with the additional safety features of the Endurance MotorController.
The Pro is intended for racing sailors, solo sailors, and ocean sailors who desire maximum reliability. The system can steer based on the internal compass, wind angle, GPS course, waypoints, and routes. The use of an external compass is also possible.
Configuration and calibration are performed via the web interface on your smartphone, tablet, or computer. In addition to the adjustable rudder limit warning, the Pro features an adjustable current limit and current limit warning. This protects the drive in the event of a blockage or exceptionally high load.
Endurance Motor Controller
Additional hardware and software safeguards against overload, short circuits, and excessive temperature, among other things.
Stirring and current protection
Adjustable stirring and current limits with timely warning before the set limits are reached.
Designed for intensive use
For sailors who are heavily dependent on their autopilot, even during severe conditions and long voyages.
Key specs
- Midstroke 600--900mm
- Stroke length 300 mm
- Speed 58 mm / s
- Peak power 85 kg
- Average usage approximately 1,5 A
- MotorController Endurance version
- Drive connection 5-pin, pre-assembled
For whom and what possibilities?
- For racing sailors, solo sailors, and ocean sailors
- Developed for intensive use in demanding conditions
- Endurance Motor Controller with extensive safety features
- Adjustable rudder limit and current limit warning
- Operation via display, phone, tablet, or computer
- Steering by compass course, wind angle, GPS course, and waypoints
- Integration with, among others, NMEA 0183, NMEA 2000 (in conjunction with BC-Mini-2k), SeaTalk(NG)
Calm and precise on course
The Pcnautic steering software starts correcting early and uses as little rudder deflection as possible. As a result, the boat stays on course more steadily and the propulsion system does not have to make large movements.
The internal 9-axis motion sensor continuously records the course and movements of the boat. In combination with the internal rudder position sensor and the strong, fast TillerDrive, this ensures precise steering, low power consumption, and limited noise.
Extra protection with Endurance MotorController
The Pro combines the TillerDrive with the Endurance MotorController. This version features additional hardware and software safeguards, including extra fuses and protection against overload, short circuit, and excessive temperature.
With the adjustable maximum current, the drive is stopped as soon as the set value is exceeded. The current limit warning can provide a notification even before this limit is reached. The Pro also features the adjustable rudder limit warning. The midstroke is 600–900 mm and the maximum total cable length between the drive and Motor Controller is 2 meters.
Customer installation examples
Specifications
Pcnautic Pro TillerDrive
- Supply voltage 12 V DC
- Motor current 0 A standby / 5 A max.
- Midstroke 600--900mm
- Stroke length 300 mm
- Speed 58 mm / s
- Peak power 85 kg
- Static holding force 200 kg
- Full rudder at 250 mm approximately 4 seconds
- Indicative water displacement 7.000 kg
- Internal rudder position sensor Ja
- Drive connection 5-pin pre-assembled connector
Control Head and Motor Controller
- Supply voltage 12 V DC
- Standby consumption 110 mA at 12 V
- Motion sensor 9-axis IMU
- Configuration WiFi web interface
- Suitable devices Phone, tablet and computer
- NMEA0183 Via WiFi or optional USB adapter
- NMEA2000 Via optional BC-Mini-2k
- SeaTalk / SeaTalkNG Via a suitable interface
- Software updates Regularly available
- Steering limit warning Adjustable
- Power limit warning Adjustable
- MotorController Endurance version
- Additional security measures Overload, short circuit and temperature
