Pcnautic Easy Tiller Pilot
€ 895,00 incl. VAT
In Stock
Midstroke
The midstroke is the distance between the Tillerpin and Brass bushing with the rudder in the middle.
With the Easy Drive without rudder feedback a minimum midstroke of 570mm is possible, with rudder feedback a minimum of 600mm, maximum 900mm
The push rod extensions from Raymarine and Simrad do not fit the Pcnautic drive
The Raymarine Q047 drive (ST4000/SPX5/S1/EV-100) has a standard midstroke of 620mm without extension
The Simrad TP10, TP22 and TP32 have a standard midstroke of 595mm without extension
The Raymarine ST1000 and ST2000 have a standard midstroke of 589mm without extension
Connector drive
You can choose between a straight connector or an angled connector on the drive.
The Offshore and Pro Tiller Pilot is supplied with pre-assembled 5-pin solder plugs.
The Easy Tiller Pilot only comes with the straight 2-pole screw connectors supplied separately.
The Raymarine Tiller Drive Replacement set comes pre-assembled with 5-pin solder connectors.
Drive cable length
The cable length at the drive together with the cable length from the socket to the MotorController or mounting box cannot exceed 1,95 meters in total.
Connector socket
You can choose between a straight connector or an angled version.
The angled version is suitable for a maximum skin thickness of 10 mm
The Offshore and Pro Tiller Pilot is supplied with pre-assembled 5-pin solder plugs.
The Easy Tiller Pilot only comes with the straight 2-pole screw connectors supplied separately.
The Raymarine Tiller Drive Replacement set comes pre-assembled with 5-pin solder connectors.
Length socket cable
The cable length at the drive together with the cable length from the socket to the MotorController or mounting box cannot exceed 1,95 meters in total.
Control head cable length
Info length control head cable
Power cord length
Power cable length info
Description
The smart autopilot for relaxed sailing
The Pcnautic Easy Tiller Pilot is a powerful, accurate, and easy-to-install autopilot for sailboats with tiller steering.
The Easy was developed for cruising sailors who want reliable course control without complicated installation. The system can steer using the internal compass, wind angle, GPS course, waypoints, and routes. The use of an external compass is also possible.
Configuration and calibration are performed via the web interface on your smartphone, tablet, or computer. By making early and controlled corrections, the boat remains calmly on course, with minimal rudder movement, low power consumption, and limited noise.
Install - the easy way
Compact design, easy to connect, and quick to configure via the step-by-step web interface.
Fast and accurate
High-Performance Steering corrects early and uses as little rudder movement as possible.
Powerful and efficient
A strong and fast TillerDrive with internal limit switches and low average power consumption.
Key specs
- Midstroke 570--900mm
- Stroke length 300 mm
- Speed 58 mm / s
- Peak power 85 kg
- Average usage approximately 1,5 A
- Drive connection 2-pole screw connector
For whom and what possibilities?
- For cruising sailors with tiller steering
- Suitable for coastal sailing and longer voyages
- Simple replacement of an existing tiller pilot
- Operation via display, phone, tablet, or computer
- Steering by compass course, wind angle, GPS course, and waypoints
- Integration with, among others, NMEA 0183, NMEA 2000 (in conjunction with BC-Mini-2k), SeaTalk(NG)
Calm and precise on course
The Pcnautic steering software starts correcting early and uses as little rudder deflection as possible. As a result, the boat stays on course more steadily and the propulsion system does not have to make large movements.
The internal 9-axis motion sensor continuously records the course and movements of the boat. In combination with the strong and fast TillerDrive, this ensures precise steering, low power consumption, and limited noise.
Robust Pcnautic TillerDrive
The included TillerDrive is equipped with a large, robust motor, a stroke length of 300 mm, and internal limit switches. These interrupt the power supply to the motor as soon as the mechanical end position is reached.
The midstroke can be adjusted between 570 and 900 mm. Thanks to the two-pole screw connector, the required cable length between the drive and MotorController can be easily adapted to the installation.
Customer installation examples
Specifications
Pcnautic TillerDrive
- Supply voltage 12 V DC
- Motor current 0 A standby / 5 A max.
- Midstroke 570--900mm
- Stroke length 300 mm
- Speed 58 mm / s
- Peak power 85 kg
- Static holding force 200 kg
- Full rudder at 250 mm approximately 4 seconds
- Indicative water displacement 7.000 kg
- Drive connection 2-pole screw connector
Control Head and Motor Controller
- Supply voltage 12 V DC
- Standby consumption 110 mA at 12 V
- Motion sensor 9-axis IMU
- Configuration WiFi web interface
- Suitable devices Phone, tablet and computer
- NMEA0183 Via WiFi or optional USB adapter
- NMEA2000 Via optional BC-Mini-2k
- SeaTalk / SeaTalkNG Via a suitable interface
- Software updates Regularly available
