Pcnautic Autopilot Remote Control

Description

The Receiver of the Pcnautic Autopilot Remote Control can be connected via the USB plug to the ControlHead.

If you are already using the USB, you can use a regular 2.0 USB hub to expand the number of connections.

For a waterproof connection to the ControlHead, the Receiver is also available with a waterproof USB plug.

8 Button Pcnautic Remote:

When operating via the remote, you will hear a beep from the ControlHead for confirmation with each key.

< function is equivalent to the port arrow on the ControlHead:

In standby mode the rod retracts and by keeping the button pressed it goes faster and faster.

In Auto mode -1 when pressed, first -5 degrees consecutively +10 degrees each time up to a maximum of 100 degrees.

> function is equivalent to the starboard arrow on the ControlHead:

In standby mode the rod extends, by keeping the button pressed it goes faster and faster.

In Auto mode +1 when pressed, first +5 degrees consecutively, each time +10 degrees up to a maximum of 100 degrees.

<< function is equal to the << key in the web interface:

In standby mode it retracts the set distance, set at Servo distance direction big.

In Auto mode -10

>> function is equal to the >> key in the web interface:

In standby mode it extends the set distance, set at Servo distance direction big.

In Auto mode +10

M/mode function changes the heading source if wind and/or GPS data is available.

T/Tack function is the same as Tack Mode on the Controlhead, as long as tack mode is on you can tack with the arrow keys.

To disable tack mode, press T/tack again

You can also tack directly without tack mode by simultaneously pressing < and A/auto for tacking to port and by simultaneously pressing > and S/standby to starboard.

S/standby function is Standby

A/ auto function is Auto-mode / Auto follow mode

Basic Remote 

4 button Basic Remote with A,B,C and D

When operating via the remote, you will hear a beep from the ControlHead for confirmation with each key.

A function is equivalent to the port arrow on the ControlHead:

In standby mode the rod retracts and by keeping the button pressed it goes faster and faster.

In Auto mode -1 when pressed, first -5 degrees consecutively +10 degrees each time up to a maximum of 100 degrees.

B function is equivalent to the starboard arrow on the ControlHead:

In standby mode the rod extends, by keeping the button pressed it goes faster and faster.

In Auto mode +1 when pressed, first +5 degrees consecutively, each time +10 degrees up to a maximum of 100 degrees.

C function is Standby

D function is Auto mode / Auto follow mode

The following functions are available by pressing keys simultaneously:

A+C=-10, B+D=+10, A+B=Mode, C+D=Tack mode, A+D=direct tack port and B+C=direct tack starboard.