Description
With this NMEA output you can forward the NMEA0183 data to other NMEA 0183 instruments such as a Plotter, Autopilot, VHF radio, etc. Ask us what you need for your configuration and the many possibilities!
With the NMEA OUT Module you can add a NMEA output to the BoatController, if you already have the NMEA input in use the output can only work with the same baud rate.
If you want more outputs, you need to purchase the BC-Multiplexer, in which up to 4 NMEA OUT Modules can be placed.
Fully galvanically isolated optocoupler with a 2 wire differential NMEA0183 output at RS422 level, compatible with RS232 (has its own galvanically isolated power supply on the output for maximum protection)
Specifications
Fully galvanically isolated optocoupler with a 2 wire differential NMEA0183 output at RS422 level, compatible with RS232 (has its own galvanically isolated power supply on the output for maximum protection)
Specifications Optocoupler:
- Wide supply voltage: 2.7V to 24V VCC Operation
- Low Drive Current: 3mA • Open Collector Output
- TTL compatible
- 15 kV/μs High Common-Mode Rejection at VCM = 1500 V
- Guaranteed performance from Temperature Range: -40°C to +105°C
- Low Propagation Delay: 1μs max at 5V
- Worldwide Safety Approval (Pending): – UL1577 recognized, 3750Vrms/1min – CSA Approval – IEC/EN/DIN EN 60747-5-5 Approval
Support
The NMEA OUT Module is very easy to install with one action.
Can also be used separately with a Raspberry pi, ask us about the possibilities.
Reviews
There are no reviews yet.